Skip to content
toolsdocks

Microphone Test Online

Speak and watch the level meter move. This page opens the mic and webcam test with only the microphone ticked; the meter shows RMS and peak levels in dBFS, and a 5-second recording lets you hear how you sound.

Runs on your device

More options in the full Microphone and webcam tester.

Loading tool…

How to use it

  1. Keep Microphone ticked and Camera unticked (preselected here), then start the test.
  2. Allow microphone access.
  3. Speak and watch the level meter; choose another input under Microphone device if needed.
  4. Record a 5-second clip and play it back; try the Browser voice processing switch.

Worked example

A steady tone at half of full scale reads about -6 dBFS peak and -9 dBFS RMS. Speak normally and keep peaks below 0 dBFS so the recording does not clip.

Formats and limits

EnginegetUserMedia, AnalyserNode, MediaRecorder; nothing is recorded unless you press Record

Limitations

  • Needs a current browser and microphone access over HTTPS.
  • The test recording is 5 seconds long.
  • Playback echoes without headphones.

Questions

The meter does not move. What should I check?

Allow the microphone when the browser asks, choose the right input under Microphone device, and make sure it is not muted in your system sound settings.

What do the dBFS numbers mean?

0 dBFS is the loudest level the recording can hold. Speech that peaks around -6 to -12 dBFS is clear without clipping; the meter marks clipping and silence.

What does Browser voice processing do?

It switches the browser's echo cancellation, noise suppression and automatic gain on or off, so you can hear the difference in the test recording.

Is the audio uploaded?

No. The microphone stream and the test recording stay in your browser.

Privacy

Runs on your device. Files and text are processed in this browser tab and are not uploaded.

This page opens the Microphone and webcam tester ready for this task. See the privacy policy for how toolsdocks handles data.