Skip to content
toolsdocks

Webcam Test

See your camera live in the browser. This page opens the mic and webcam test with only the camera ticked; the preview shows the resolution and frame rate, and a 5-second recording plays back on your device.

Runs on your device

More options in the full Microphone and webcam tester.

Loading tool…

How to use it

  1. Keep Camera ticked and Microphone unticked (preselected here), then start the test.
  2. Allow camera access when the browser asks.
  3. Pick the camera device if you have more than one, and toggle Mirror the preview.
  4. Record a 5-second test clip and play it back.

Worked example

Open the page, allow the camera, and your live image appears with its resolution, for example 1280x720 at 30 fps. With an external webcam, choose it under Camera device and record a 5-second test to compare the picture.

Formats and limits

EnginegetUserMedia, AnalyserNode, MediaRecorder; nothing is recorded unless you press Record

Limitations

  • Needs a current browser and camera access over HTTPS.
  • The test recording is 5 seconds long.
  • Camera names are shown only after access is granted.

Questions

Why is there no image?

Allow the camera in the browser's site settings, then close other apps that may be using it, such as Zoom or Teams, and start the test again.

Why does my picture look mirrored?

The preview is mirrored like a mirror so it feels natural. Switch off Mirror the preview to see what others see in a call; they always see you unmirrored.

Is the video uploaded?

No. The camera stream and the test recording stay in your browser; the clip is played back from your device.

Privacy

Runs on your device. Files and text are processed in this browser tab and are not uploaded.

This page opens the Microphone and webcam tester ready for this task. See the privacy policy for how toolsdocks handles data.